UNALOK MATERIAL HANDLING HOSE TYPE 333

UIP International is proud to offer a flexible solution for all your material handling needs.  Save time and money with our most versatile material handling hose, available in sizes up to 14″ and in a variety of compounds.unalok material handling hose

The Unalok hose offers a multitude of benefits including:

 

  • high abrasion resistant tubes
  • full flow of product through the hose
  • no built-in nipples to wear out 
  • easily adaptable to existing systems 
  • streamlined design allows for custom length assemblies which can be fabricated on-site in minutes

 

This industrial engineered hose is as easy to assemble as a band-on coupling.  It is perfect for field repairs, minimizing downtime.  It can be used for vibration absorption, field transfer, cargo loading, tank transfer and slurry transport.  Ideally, this product can be kept on-hand in frequently used sizes, allowing for immediate on-the-job repair and installation.

 

Unalok elastomer options

 

Unalok Hose is available in many different tube elastomers including Red Natural Rubber, Black Natural Rubber and Tan Pure Gum Rubber – ready to handle your most demanding applications.  

We stock sizes 2″ – 12″ and can fabricate 14″ upon request.  Other options include duck and rubber flanges, built-in nipples, rubber-lined nipples and beaded ends. 

 

Call now for more information on our Unalok Material Handling Hose
800-257-2467

 

 

UNALOK Installation Instructions

Items you will need:
Measuring tape, chalk, knife, hacksaw, clamps, wrenches

  1. Measure and mark the required length of hose.  Add a little extra length for trimming and lateral overlap.
  2. Cut off the marked length of hose plus the extra length, using a sharp wet cutting tool, such as a knife.
  3. Pull the cut surfaces apart so that the steel helix can be pulled out of the rubber. Cut off the steel helix.
  4. Place the two halves of UNALOK coupling parts 1 and 2 at the position marked and clamp together.
  5. Bolt the two halves of the coupling through the joining flanges, inspect the lining of the hose at frequent intervals while tightening bolts. The end of the hose should extend about 1/8” beyond the coupling flange.  Installation is complete when corrugated deformations become clearly visible in the bore of the hose.
  6. Place a sealing gasket between the two couplings and bolt the coupling flanges together. The hose should be attached to a supporting structure over its entire length, but particularly in the area of bends. Conventional hose clamps can be used to prevent undesirable movement of the hose.

 

Item No.

I.D.

(in.)

O.D.

(in.)

Wt./Ft. (lbs.) Lining/Tube Thickness (in.) W.P.

(psi)

Vacuum Hg Min. Bend Ra (in.) Max Prod. Length/Ft.

Stock Item or Min. Order

333-02

2″ 3.11 1.92 1/4 150 25″ 11 7/8 100′

STOCK

333-03

3″ 4.65 4.80 1/4 150 25″ 13 3/4 100′

STOCK

333-04

4″ 5.38 5 1/4 150 25″ 19 5/8 100′

STOCK

333-05

5″ 6.58 7.4 5/16 150 25″ 25 5/8 100′

STOCK

333-06

6″ 7.73 9.2 3/8 150 25″ 29 9/16 100′

STOCK

333-08

8″ 10.02 16.06 3/8 150 25″ 68 7/8 40′

STOCK

333-10

10″ 11.89 16.96 3/8 150 25″ 78 3/4 40′

STOCK

333-12

12″ 13.74 18.65 5/16 150 25″ 98 7/16 40′

STOCK

333-14

14″ 16.36 30.35 3/8 150 25″ 111 1/8 40′ CUSTOM