Our extremely durable industrial grade Neoprene has excellent weathering and ozone resistant properties. It is suitable for greases, inorganic salts, fats, water and oils, which makes it a great choice for various outdoor and marine applications. Despite its strong durability, it should not be used in strong oxidizing acids or esters, which will cause degradation of the material. Neoprene is also not suitable for Ketones, Chlorinated, aromatic or nitro hydrocarbon applications.

Our commercial grade Neoprene offers a less expensive alternative to our industrial grade Neoprene. This is a cost effective option for applications that require less durability and resistance. It offers the same great characteristics as industrial grade including excellent resistance to weather and ozone applications.

Corrugated rubber matting makes for an ideal non-slip floor runner and protector. The ribbed surface collects debris and dirt, keeping walk ways clean and reducing safety hazards. Ideal for industrial, home and office buildings, where abrasion resistance and sound absorbing qualities are key.

Features:
• Used as a floor runner, protector
• Bottom side plate finish
• Made to RMA’s specifications

Temperature: -20 to 180°F
Color: Black

With a 14.5 oz. Nylon Insert, our diaphragm material has better tear resistance than any other cloth-inserted rubber. Used for applications requiring more fabric strength, while still maintaining Neoprene’s excellent ozone and weather resistant properties.

Features:
• Plate finish
• Insertion-nylon 14.5 oz. per sq./yd.
• Mullen burst test rating over 1000 psi with 1″
square opening
• For applications requiring more fabric
strength than Neoprene CI
• Made to RMA’s specifications

Duro: 60
Tensile: 1000 psi
Temperature: -20 to 170°F
Elongation: 350%
Color: Black

Our Buna Nitrile is a synthetically produced rubber ideal for seals, gaskets and O rings in applications requiring a highly oil-resistant material. Our most versatile rubber, Nitrile is used in a wide range of applications from marine fuel systems to engine carburetors. In addition to its excellent resistance to petroleum based fluids, it is also good for water, alcohols, chemicals and silicone grease applications.  

Features:
• Plate finish
• For use in applications requiring a highly oil-resistant material

Color: Black
*50 Duro Special Order

Our 3.4 oz. Nylon Inserted SBR CI increases stability in high compression applications. Its good physical properties and abrasion resistance makes it an ideal choice for various air, hot water, low-pressure steam, and hydraulic services. Its low resistance to oil and gas makes it a poor choice for petroleum based applications.

Features:
• Plate finish
• Insertion-nylon 3.4 oz. per sq.yd.
• General use where a fabric reinforced rubber is
required
• Made to RMA’s specifications

Temperature: -25 to 170°F
Color: Black

Paired with 3.4 oz. Nylon insert and Neoprene’s excellent weathering and ozone resistant properties, Neo CI is used for applications requiring more durability than a standard Neoprene sheet can handle. The added nylon fabric makes it suitable for a variety of services including pads, chutes, rubber sleeves and safety guards. The inserted cloth also reduces creep in seals and gasket services.

Features:
• Plate finish
• Insertion-nylon 3.4 oz./sq.yd.
• General use where an oil-resistant rubber is
required

Duro: 60
Tensile: 1000 psi
Elongation: 300%
Temperature: -20 to 180°F
Color: Black

Extremely popular for gasket cutting materials due to its good physical ability to conform to uneven flange edges. Red Rubber is a low cost option for cold/hot water, low-pressure steam, gas and air applications. It should not be used in services that contain oils, grease, chlorates and strong acids.

Features:
• Plate finish
• For general gaskets with no oil-resistant
requirements

Duro: 75
Tensile: 500 psi
Elongation: 250%
Temperature: -20 to 170°F
Color: Red-brown
*Fabric Finish Red Rubber Special Order

Outstanding tensile, elongation and abrasion resistance make our tan gum great for tubes, sleeves, and wear pads in many industrial applications. An FDA approved material, Tan Gum has low temperature flexibility, compression set, and excellent adhesion to fabric and metals. Tan Gum should not be used in services that expose the material to ozone conditions or petroleum-based fluids.

Features:
• Plate finish
• A soft abrasion-resistant sheet rubber
• Meets FDA requirements
• Made to RMA’s specifications

Duro: 40
Tensile: 2500 psi
Elongation: 600%
Temperature: -20 to 140°F
Color: Tan

An alternative to black colored elastomers, White Nitrile shares all the same great physical and chemical qualities as standard Black Nitrile except for its color.  White Nitrile is non-marking and grease-resistant. It is also suitable for food grade applications.  It is often used in cosmetics, grocery stores and various medical applications. White Nitrile is not suitable for weathering and ozone applications.

Features:
• Plate finish
• Meets FDA requirements for food grade applications
• Grease-resistant
• Non-marking

Duro: 60
Tensile: 700 psi
Elongation: 300%
Temperature: -20 to 170°F
Color: White

EPDM (Ethylene Propylene Diene Monomer) is one of the most commonly used elastomers for seals and gaskets because of its high resistance to weather, ozone and UV rays. EPDM is most commonly used in applications where there is significant environmental exposure such as in the automotive and marine industries. EPDM is also good for chemical-based fluids such as anti-freeze, synthetic detergents, acetone, boric acid, ethanol, formaldehyde, and silver nitrate. EPDM should not be used in petroleum-based applications.

Features:
• Plate finish
• For applications requiring high temperature,
good ozone, non-oil resistance.
• Good for outdoor applications
• Peroxide cured

Duro: 60/70
Color: Black

Butyl rubber is an excellent choice for shock absorption and has low moisture and gas permeability. It has great resistance to heat, aging, weather, ozone, chemical attack, abrasion and tearing conditions. It is resistant to phosphate ester based hydraulic fluids and has excellent electrical properties. Butyl is not suitable for petroleum-based fluid applications.

Features:
• Plate finish
• Good weathering and electrical properties
• Good heat resistance

Duro: 60
Tensile: 750 psi
Elongation: 300%
Temperature: -20° to 170°F
Color: Black
*Special Order 50D/70D

CSM (chlorosulfonated polyethylene) is known for its excellent resistance to weathering, ozone and chemical applications. It is most commonly used in automotive and industrial services that require high-performance and must withstand extreme temperatures and weather conditions such as rubber linings, valve seals and gaskets.

Features:
• Excellent resistance to ultraviolet light, ozone, and
some chemicals.
• Good oil resistance
• Made to RMA’s specifications

Duro: 60
Tensile: 800 psi
Elongation: 300%
Temperature: -20 to 210°F
Color: Black

Nitrile is the polymer of choice for applications requiring oil and solvent resistance. With 3.4 oz. of nylon insert and the properties of regular Nitrile, our Buna N CI material is an excellent choice for applications requiring oil and gasoline resistance and superior resistance to petroleum-based hydraulic fluids.

Features:
• Commercial grade
• Nitrile with 3.4 oz. nylon insert
• Plate finish
• Superior oil and gas resistant properties

Duro: 60
Tensile: 1000 psi
Elongation: 250%
Temperature: -20 to 180°F
Color: Black

White Neoprene is non-marking and meets FDA food grade requirements making it a great option for all food and beverage applications. It demonstrates good abrasive qualities and has excellent resistance to weathering and ozone conditions.

Features:

• Plate finish
• Meets FDA food grade requirements
• Non-marking
• Made to RMA’s specifications

Duro: 60
Tensile: 750 psi
Elongation: 300%
Temperature: -20 to 170°F
Color: White

White EPDM has all the great benefits of black EPDM, including resistance to weather, ozone and UV ray conditions. It is also non-marking and meets FDA food grade requirements. It is used in many food and marine applications.

Features:
• FDA food grade
• Non-marking
• Plate finish
• Made to RMA’s specifications

Duro: 60/70
Tensile: 750 psi
Elongation: 300%
Temperature: -40 to 212°F
Color: White

FKM has high temperature ratings up to 450 Degrees F, extremely high levels of resistance to chemicals, heat, oil, and mineral acids.  Due to its high resistance to petroleum-based fluids it is commonly used in fuel and engine systems, in addition to aerospace and aircraft service industries.

Service media:
• Chemicals, oils, lubricants,
flue gas
• Plate finish
• Commercial Grade

Duro: 70
Tensile: 700 psi
Elongation: 150%
Temperature: -20 to 450°F
Color: Black

PLEASE NOTE!

The general properties shown in these charts  are not intended to be used to make final choices for a specific application. Exposure to heat, sunlight, chemicals, ozone and oils, as well as pressure, tension, binding, stretching and folding will affect the performance of a rubber product.

Suitability must be determined by a qualified professional.

UIP International, Inc.

1350 S. Dixie Highway East | Pompano Beach, FL 33060 Mail: P.O. Box 1299 | Pompano Beach, FL 33061

Ph: (800) 257-2467 | In FL: (954) 785-3539 | Fax: (954) 946-3583

www.uipintl.com | sales@uipintl.com

Warehouse facilities in Houston, TX