UIP INTERNATIONAL

  • UIP INTERNATIONAL
    WHERE QUALITY IS THE STANDARD
  • CALL US
    1-800-257-2467
0
  • No products in the cart.

SHEET RUBBER STYLES

**NEW ITEM – ECONOMY NEOPRENE 60 DUROMETER

Neoprene Sheet Type 90

Features:
• Commercial grade Neoprene
• Plate finish
• Moderate oil and ozone resistant properties
• Stocked in Houston warehouse

Duro: 50/60/70 in most sizes
Tensile: 800 psi
Elongation: 400%
Temperature: -20 to 180°F
Color: Black

Sheet Rubber
Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs./Roll
36″ / 48″
1/32″ 36 or 48 50 46 / 61
1/16″ 36 or 48 50 73 / 97
3/32″ 36 or 48 50 109 / 145
1/8″ 36 or 48 50 145 / 194
3/16″ 36 or 48 50 218 / 290
1/4″ 36 or 48 25 145 / 194
3/8″ 36 or 48 25 218 / 290
1/2″ 36 or 48 25 288 / 384
3/4″ 36 or 48 25 432 / 576
1″ 36 or 48 25 576 / 769

Neoprene Sheet Type 60 – Economy Neoprene

Features:
• Commercial grade Neoprene
• Plate finish
• Moderate oil and ozone resistant properties
• Stocked in Houston warehouse

Duro: 60
Tensile: 400-500 psi
Elongation: 200%
Color: Black

Sheet Rubber
Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs./Roll
1/16″ 48 50 97
1/8″ 36 50 145
1/8″ 48 50 194
3/16″ 48 50 290
1/4″ 36 25 145
1/4″ 48 25 194
3/8″ 48 25 290
1/2″ 48 25 384

Rubber Roll Matting (Corrugated) Type 86

Features:
• Used as a floor runner, protector
• Bottom side plate finish
• Made to RMA’s specifications

Temperature: -20 to 180°F
Color: Black

Sheet Rubber
Gauge
(In.)
Width
(in.)
Square Yd./Roll Approx. Lbs/Roll Length
Ft./Roll
1/8″ 36 25 236 75
1/8″ 48 33 315 75
1/4″ 36 25 472 75
1/4″ 48 33 630 75

Neoprene Diaphragm Sheet Type 88

Features:
• Plate finish
• Insertion-nylon 14.5 oz. per sq./yd.
• Mullen burst test rating over 1000 psi with 1″
square opening
• For applications requiring more fabric
strength than Neoprene CI
• Made to RMA’s specifications

Duro: 60
Tensile: 1000 psi
Temperature: -20 to 170°F
Elongation: 350%
Color: Black

Sheet Rubber
Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approx. Lbs./Roll Ply
1/16″ 50″ 50 96 1
3/32″ 50″ 50 144 1
1/8″ 50″ 50 192 2
3/16″ 50″ 50 288 2
1/4″ 50″ 25 192 2

Nitrile Sheet Buna N Type 93

Features:
• Plate finish
• For use in applications requiring a highly oil-resistant material

Duro: 65
Tensile: 700 psi
Elongation: 200%
Temperature: -30 to 200°F
Color: Black

Sheet Rubber
Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs./Roll
36″/48″
1/16″ 36 or 48 50 73 / 97
3/32″ 36 or 48 50 109 / 145
1/8″ 36 or 48 50 145 / 194
3/16″ 36 or 48 50 218 / 290
1/4″ 36 or 48 25 145 / 194
3/8″ 36 or 48 25 218 / 290
1/2″ 36 or 48 25 288 / 384

SBR CI Sheet Type 96

ASTM D2000 M2-AA-603-A13-B13-EA14

Features:
• Plate finish
• Insertion-nylon 3.4 oz. per sq.yd.
• General use where a fabric reinforced rubber is
required
• Made to RMA’s specifications

Duro: 70
Tensile: 450 psi
Elongation: 300%
Temperature: -25 to 170°F
Color: Black

Sheet Rubber
Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs./Roll
36″ / 48″ 
Ply
1/16″ 36 or 48 50 69 / 92 1
3/32″ 36 or 48 50 104 / 138 1
1/8″ 36 or 48 50 198 / 184 2
3/16″ 36 or 48 50 257 / 276 2
1/4″ 36 or 48 25 138 / 184 2

Neoprene CI Sheet Type 87

ASTM D2000 BC-607-A14-B14-C12-F17

Features:
• Plate finish
• Insertion-nylon 3.4 oz./sq.yd.
• General use where an oil-resistant rubber is
required

Duro: 60
Tensile: 1000 psi
Elongation: 300%
Temperature: -20 to 180°F
Color: Black

Sheet Rubber
Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs./Roll
36″ / 48″
Ply
1/16″ 36 or 48 50 69 / 92 1
3/32″ 36 or 48 50 104 / 138 1
1/8″ 36 or 48 50 138 / 184 2
3/16″ 36 or 48 50 257 / 276 2
1/4″ 36 or 48 25 138 / 184 2

Red Rubber Sheet Type 95

Features:
• Plate finish
• For general gaskets with no oil-resistant
requirements

Duro: 75
Tensile: 400 psi
Elongation: 200%
Temperature: -20 to 180°F
Color: Red-brown

Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs./Roll
36″ / 48″ 
1/16″ 36 or 48 50 83 / 110
3/32″ 36 50 124 / N.A.
1/8″ 36 or 48 50 165 / 220
3/16″ 36 or 48 50 248 / 330
1/4″ 36 or 48 25 165 / 220

Tan Pure Gum Sheet Type 97

Features:
• Plate finish
• A soft abrasion-resistant sheet rubber
• Meets FDA requirements
• Made to RMA’s specifications

Duro: 40
Tensile: 2700 psi
Elongation: 700%
Temperature: -20 to 160°F
Color: Tan

Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs./Roll
36″ / 48″ 
1/16″ 36 or 48 50 50 / 66
1/8″ 36 or 48 50 149 / 199
3/16″ 36 or 48 50 100 / 133
1/4″ 36 or 48 25 149 / 199
3/8″ 36 or 48 25 198 / 264
1/2″ 36 or 48 25 247 / N.A.
3/4″ 36 or 48 25 297 / 396
1″ 36 or 48 25 395 / 528

White Nitrile Sheet Type 94

Features:
• Plate finish
• For applications where FDA requirements and
good oil resistance are needed
• Non-marking

Duro: 60
Tensile: 900 psi
Elongation: 400%
Temperature: -20 to 200°F
Color: White

Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs./Roll
36″ / 48″ 
1/16″ 36 or 48 50 73 / 97
1/8″ 36 or 48 50 145 / 194
3/16″ 36 or 48 50 218 / 290
1/4″ 36 or 48 25 145 / 194
1/2″ 48 25 288 / 384
3/4″ 48 25 N.A. / 645

EPDM Sheet Type 85

Features:
• Plate finish
• For applications requiring high temperature,
good ozone, non-oil resistance.
• Good for outdoor applications
• Peroxide cured

Duro: 60/70
Tensile: 800 psi
Elongation: 300%
Temperature: -40 to 230°F
Color: Black

Sheet Rubber
Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs./Roll
36″ / 48″ 
1/16″ 48 50 73 / 97
1/8″ 36 or 48 50 145 / 194
3/16″ 48 50 218 / 290
1/4″ 36 or 48 25 145 / 194
3/8″ 48 25 218 / 290
1/2″ 48 25 288 / 384

Butyl Sheet Type 91

Features:
• Plate finish
• Good weathering and electrical properties
• Poor oil resistance, but good heat resistance

Duro: 50/60/70
Tensile: 1000 psi
Elongation: 300%
Temperature: -30 to 230°F
Color: Black

Sheet Rubber
Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs./Roll
36″ / 48″ 
1/16″ 48 50 77 / 103
1/8″ 36 or 48 50 155 / 207
3/16″ 48 50 232 / 310
1/4″ 48 25 155 / 207

CSM Sheet Type 92

Features:
• Excellent resistance to weathering, ozone, and
some chemicals.
• Good oil resistance
• Made to RMA’s specifications

Duro: 60
Tensile: 1500 psi
Elongation: 400%
Temperature: -20 to 210°F
Color: Black

Sheet Rubber
Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs./Roll
36″ / 48″ 
1/16″ 48 50 N.A. / 97
1/8″ 36 or 48 50 145 / 194
3/16″ 48 50 N.A. / 290
1/4″ 36 or 48 25 145 / 194
3/8″ 36 or 48 25 218 / 290

Buna N CI

ASTM D2000-M5-BG607-A14-B14

Features:
• Commercial grade
• Nitrile with 3.4 oz. nylon insert
• Plate finish
• Moderate oil and ozone resistant properties

Duro: 60
Tensile: 1000 psi
Elongation: 250%
Temperature: -20 to 180°F
Color: Black

Sheet Rubber
Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs./Roll
36″ / 48″
PLY
1/16″ 36 or 48 50 74 / N.A. 1
3/32″ 36 or 48 50 110 / 147 1
1/8″ 36 or 48 50 147 / 196 2
3/16″ 36 or 48 50 221 / N.A. 2
1/4″ 36 or 48 25 147 / N.A. 2

White Neoprene Sheet

Features:
• Meets FDA food grade requirements
• Non-marking
• Plate finish
• Made to RMA’s specifications

Duro: 60
Tensile: 1000 psi
Elongation: 400%
Temperature: -20 to 200°F
Color: White

Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs./Roll
36″ / 48″ 
1/16″ 36 or 48 50 73 / 97
1/8″ 36 or 48 50 145 / 194
3/16″ 36 or 48 50 218 / 290
1/4″ 36 or 48 25 145 / 194

White EDPM Sheet

Features:
• FDA food grade
• Non-marking
• Plate finish
• Made to RMA’s specifications

Duro: 60/70
Tensile: 800 psi
Elongation: 400%
Temperature: -20 to 180°F
Color: White

Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs./Roll
1/16″ 48 50 97
1/8″ 48 50 194
3/16″ 48 50 290
1/4″ 48 25 194

FKM Sheet (comparable to Viton®/Flourel)

Service media:
• Chemicals, oils, lubricants,
flue gas
• Plate finish
• Commercial Grade

Duro: 70
Tensile: 700 psi
Elongation: 150%
Temperature: -20 to 450°F
Color: Black

FKM Sheet Rubber
Gauge
(In.)
Width
(in.)
Length
Ft./Roll
Approximate Lbs. / Roll
36″ / 48″ 
1/16″ 36 or 48 50 73 / 97
1/8″ 36 or 48 50 145 / 194

PLEASE NOTE!

The general properties shown in these charts  are not intended to be used to make final choices for a specific application. Exposure to heat, sunlight, chemicals, ozone and oils, as well as pressure, tension, binding, stretching and folding will affect the performance of a rubber product.

Suitability must be determined by a qualified professional.

UIP International, Inc.

1350 S. Dixie Highway East | Pompano Beach, FL 33060 Mail: P.O. Box 1299 | Pompano Beach, FL 33061

Ph: (800) 257-2467 | In FL: (954) 785-3539 | Fax: (954) 946-3583

www.uipintl.com | sales@uipintl.com

Warehouse facilities in Houston, TX